Shrinky Dinks...new to me!

Maybe everyone already knew this but I didn't! Last week a new attendee, Debbie from Morgantown, introduced me to the wonder of colored pencil on Shrinky Dink plastic. I have been in experiment mode since then.

It is thin, strong, and lightweight with a nice surface texture on both sides -- the pencil turns into a matte finish and captures a surprising amount of line detail...color neatly! The non-frosted side ends up very shiny -- almost like a coat of satiny resin.

The really cool thing is that after you bake it (325 degrees for the shrinky plastic), you can back it with polymer and bake at the polymer temp and it bonds with the clay. No glue or liquid clay needed. It seems like you'd really have to use some force to separate them. However, I don't know what, if any, long-term reaction might come into play between the polymer and plastic. If anyone knows, please leave a comment.

A regular hole punch in the plastic before baking shrinks down to a perfect size for button holes or for jewelry wire to pass through.

If you bake with the shiny side up and then embed the matte side down in the clay, you end up with an image behind a glossy finish. Make sure you don't touch the glossy side before it's cool so you don't make marks in it.

It's not a fast process because you're drawing and filling in a larger image than the final size. But it's another fun tool in the kit for making delicate but strong jewelry components.

I am very impressed by how strong the plastic is.
That little teeny piece of eyelash that extends out is not in danger of breaking.
I went very light with the colored pencil on this first one so it remained
very translucent.

I colored too dark and lost detail.
I added more colored pencil on this after baking to insert some highlights.
I realized that this technique would benefit from white outlines rather than black.

You have about 10 seconds of working time to bend the plastic after it
comes out of the oven. I baked it on a 5x8 index card so I could just bend
 the card into the curve I wanted. The plastic clung to the card and took on
the curve. I wish I would have done this one with the shiny side out. I used
thin permanent marker for the black lines and turquoise
colored pencil for the background.

As you can see, this design is similar to the one above.
I drew my original design on a piece of paper so I wasn't
just winging it and I would have a template to use again.
The plastic is clear so it's easy to trace any pattern.

The frosted surface is lightly textured and is a fantastic base for the pencil.
 I also tried graphite drawing pencil and it worked just as well (though the
shiny side turns out nicer than the matte side). I determined that rounded
corners shrink more uniformly than square ones. I cut the polymer
flush with the surface of the plastic and pressed it onto a
swirly texture stamp to add decoration to the back.

I left the mitten above and the fish below unbacked with clay because the color looks good
on both sides and I didn't mess up the shiny sides when baking.

I draw this flower on a piece of paper and then used it as my "pattern" by
putting it under the plastic and using it as my guide for drawing on the film.
Even if you don't consider youself an artist, I bet you could sketch a photo
well enough to make a nice pendant or brooch.